The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches.
Air Sump Cleaner Dispenser 150 or 200 gallon
CECOR medium-sized, air operated combination tank Sump Shark has the same power as the SA5 Series, but has an extra tank for dispensing fresh fluid to the machine tool. These combination units each have two separate tanks, a sump cleaner tank and a dispenser tank. Clean the sump and filter fluid with the sump cleaner side, dispense fresh or recycled fluid with the dispenser side.
One chassis with two tools
- Two 150 or 200 gallon tanks on a single chassis
- One sump cleaner and one dispenser
Ready to clean and refill your sump quickly.
- Deep suction for cleaning sumps quickly
- Metalworking fluid, chips and swarf will be removed
- F10 Filter catches chips and swarf
- Pump in/pump out capability on both tanks
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
(2) 150 Gal (568 L) or
(2) 200 Gal (757 L)
|Standard Transport:||TW - pintle-eye to hitch|
|Suction Lift:||26" hg (Mercury)|
|Standard Filter:||F10 (optional F23 available)|
|Overfill protection:||Automatic overfill protection, all discharge ports valved|
|Clean-out door:||8"x10" door with 1-1/4" drain port|
|Pressure Discharge:||6 PSI with safety backup valve|
|Minimum air requirements:||Air runs of 3/4" or larger and verticals (drops) of 3/8" or more. Line pressure of 75 to 120 PSI and volumetric capacity of 53 to 80 CFM|
|Wheels:||(2) 16" x 4" Ruber tires: (2) 12" x 3" swivel casters|
1-1/2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler.
1-1/4" I.D. x 16' with full flow shut off nozzle.
|Tools:||(1) Straight, (1) flexible and (1) flared nozzle tool|
150 Gal: 92" L 34" W 57" H
200 Gal: 99" L 46" W 71" H
150 Gal: 1320 lbs
200 gal: 1605 lbs
Conveniently transport filtered metalworking fluid to a central recycling system; return processed metalworking fluid back to machine tool.
CA5 Series has two tanks; one a sump cleaner and the other is a coolant dispenser. The sump cleaner side removes fluid and solids from machine tools sumps quickly. Solids are removed as they pass through filter on the way into the tank. Pump out filtered metalworking fluid for reuse or transport to central recycler. The dispenser side refills the machine tool sump with fresh or treated metalworking fluid.
The CA5 Series has an on board F10, 1 cubic foot filter. For sumps loaded with chips, we recommend the optional F23 (2.3 cu.ft.) Filter. Unit has a pintle-eye tow bar for easy towing throughout plant. Flush-to-the-bottom clean out door with 1-1/4” drain port makes tank cleaning easy. Air-operated Sump Sharks have no moving parts, so maintenance is easy. All CECOR sump cleaners include a pressure gauge, overfill protection and pressure discharge safety features. All discharge ports are valved.