The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches.
Air Sump Cleaner Dispenser 250 Gallons
The CA5 Combination Sump Cleaner/metalworking fluid Dispensers have the same deep vacuum as the SA5 single tank Sump Sharks. Two completely separate tanks on a single chassis – one for sump cleaning – the other for dispensing fresh coolant into the machine tool.
One chassis with two tools
- Two 250 gallon tanks on a single chassis
- One sump cleaner and one dispenser
Ready to clean and refill your sump quickly.
- Deep suction for cleaning sumps quickly
- Metalworking fluid, chips and swarf will be removed
- Part of an effective coolant recycling program
- Pump in/pump out capability on both tanks
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
|Tank Size:||(2) 250 Gal (947 L)|
|Standard Transport:||TW - Tow|
|Suction Lift:||26" Hg (Mercury)|
|Standard Filter:||F10 - 1 cu.ft. Filter (optional F23 available)|
|Clean Out Door:||16" diameter hinged door with 2-1/2" drain port|
|Pressure discharge:||6 PSI with safety backup valve|
|Minimum air requirements:||Air runs of 3/4" or larger and verticals (drops) of 3/8" or more. Line pressure of 75 to 120 PSI and volumetric capacity of 53 to 80 CFM|
|Overfill protection:||Automatic overfill protection, all discharge ports valved|
1-1/2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler.
1-1/4" I.D. x 16' with full flow shut off nozzle.
|Wheels:||(2) 16" x 5" rubber tires (2) 12" x 3" swivel caster|
|Dimensions:||250 Gal: 111" L 48" W 73" H|
|Shipping weight:||1,700 lbs|
CA5 series dual tank, air operated sump cleaner/dispenser is ideal for use in a metalworking recycling program. One tank is a 250 gallon sump cleaner for sucking out and filtering a dirty machine tool sump. Deep suction lift of 26” Hg (Mercury) vacuums up sludge, chips and metalworking fluid from sump at up to 70 gallons per minute. Model F10 (1 cubic foot) filter separates solids from coolant. While still at the machine tool, fill the sump with reconditioned metalworking fluid from the 250 gallon dispenser side. CA5 then transports the filtered coolant in sump cleaner side to a central metalworking recycling station.
The CA5 Series has an on board F10, 1 cubic foot filter. For sumps loaded with chips, we recommend the optional F23 (2.3 cu.ft.) Filter. Unit has a pintle-eye tow bar for easy towing throughout plant. Flush-to-the-bottom clean out door with 1-1/4” drain port makes tank cleaning easy. Air-operated Sump Sharks have no moving parts, so maintenance is easy. All CECOR sump cleaners include a pressure gauge, overfill protection and pressure discharge safety features. All discharge ports are valved.