The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches. Standard color is black.
Three Phase Electric Sump Cleaner Dispenser 100 Gallons
Use the CE50-100/100PT combination sump cleaner/dispenser with a fluid recycling program. The CE50-100/100PT has two 100-gallon tanks, a sump cleaner tank a dispenser tank. Clean the sump and filter fluid with the sump cleaner side, dispense fresh or recycled fluid with the dispenser side.
One chassis with two tools
- Two 100 gallon tanks on a single chassis
- One sump cleaner and one dispenser
Ready to clean and refill your sump quickly.
- Remove the entire contents from machine tool sump quickly
- F23 Filter catches chips and swarf
- Top off sump with fresh coolant from dispenser side
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
|Tank size:||(2) 100 Gal/ea (379 L/ea)|
|Standard transport:||PT - Push/Tow|
|Motor:||5 HP Electric Motor Volts 208-230/460-Amps 14.8-14.0/7.0 - Hertz 60- Phase 3|
|Pump:||Lobe type, positive displacement air pump|
|Suction lift:||13" Hg (Mercury)|
|Standard filter:||F10- 1 cu.ft. (Optional F23 available)|
|Overfill Prevention:||Automatic overfill protection all discharge ports valved|
|Cleanout Door:||8"x10" door with 1-1/4" drain port|
|Pressure Discharge:||6 PSI (pounds per square inch) with safety back up|
|Hose:||1-1/2” I.D. x 16’ oil-resistant PVC suction/discharge hose including quick-disconnect coupler.|
|Tools:||Three suction tools (1) straight, (1) flexible and (1) flared nozzle|
|Dimensions:||121" L 42" W 60" H|
|Shipping weight:||1720 lbs|
Two tanks on a single chassis for cleaning and replenishing coolant.
Increasing costs for the purchase and disposal of metalworking fluid have made extending the life of fluid crucial to most metalworking operations. The CECOR CE50-100/100PT Combination sump cleaner/dispenser can be an important part of your fluid recycling program. The CE50-100/100PT has two 100-gallon tanks on a single chassis; a sump cleaner tank on one side and a dispenser tank on the other. Each side has a special function.
Remove the entire contents of a from machine tool sump quickly with the sump cleaner side. The power of the CE50’s five horsepower electric motor generates suction to 13” Hg (177” water) and a pumping rate to 110 gallons per minute. The sump cleaner side’s 2.3 cu. ft. catches chips and swarf, while the filtered fluid enters the tank. Filtered fluid can be pumped back to the sump or transported for batch recycling. The coolant sump can be topped off with fresh coolant from the Coolant Dispenser side of the CE50. Both tanks have pump-in/pump-out capability.