The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches. Standard color is black.
Three Phase Electric Sump Cleaner Dispenser 250 Gallons
Metalworking fluid recovery.
The CE50 3-Phase electric unit has a 5 HP motor, 13″ hg of suction power and an added tank for dispensing fresh metalworking fluid into the machine tool.
One chassis with two tools
- Two 250 gallon tanks on a single chassis
- One sump cleaner and one dispenser
Ready to clean and refill your sump quickly.
- Suction the entire contents from machine tool sump quickly
- Metalworking fluid, chips and swarf will be removed
- F50 Filter catches chips and swarf
- Top off sump with fresh coolant from dispenser side
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
|Tank size:||(2) 250 Gallon tanks (947 L)|
|Standard transport:||Tow Bar (other options available)|
|Motor:||5 HP Electric Motor Volts 208-230/460 - Amps 14.8- 14.0/7.0 - Hertz 60 - Phase 3|
|Pump:||Lobe type, positive displacement air pump|
|Suction Lift:||13" Hg (Mercury)|
|Standard filter:||F50 -5 cu.ft. Filter|
|Overfill prevention:||Automatic overfill protection, all discharge ports valved|
|Cleanout door:||16" diameter hinged door with 2-1/2" drain port|
|Pressure discharge:||6 PSI with safety backup valve|
|Wheels:||(2) 16" x 4" rubber tires; (2) 12" x 3" swivel caster|
2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler.
1-1/4" I.D. x 16' with full flow shut off nozzle.
|Tools:||Three suction tools (1) straight, (1) flexible and (1) flared nozzle|
|Dimensions:||111" L 48" W 79" H|
|Shipping weight:||2,170 lbs|
Filter and replenishing metalworking fluid
Increasing costs for the purchase and disposal of metalworking fluid has made extending the life of metalworking fluid crucial to most metalworking operations. The CECOR CE50-250/250TW combination sump cleaner/dispenser can be an important part of your metalworking fluid filtering and recovery program. The CE50-250/250TW has two 250-gallon tanks on a single chassis; a sump cleaner tank on one side and a dispenser tank on the other. Each side has a special function.
Remove the entire contents of a from machine tool sump quickly with the sump cleaner side. The power of the CE50’s five horsepower electric motor generates suction to 13” Hg (177” water) and a pumping rate to 110 gallons per minute. The sump cleaner side’s 5.0 cu. ft. catches chips and swarf, while the filtered coolant enters the tank. Filtered coolant can be pumped back to the sump or transported for batch recycling. The metalworking fluid sump can be topped off with fresh metalworking fluid from the Dispenser side of the CE50. Both tanks have pump-in/pump-out capability.