SA5 Series
Air Powered Sump Cleaner uses existing plant air supply to vacuum chips, swarf, sludge and fluids from dirty sumps. Clean up your machine tool sumps smarter, faster and safer with a Sump Shark®! It’s time to ditch the grueling pail-n-shovel or shop-vac process.
The Right Tool
• Filter the thickest of sludge | • Air operated venturi | |
• High suction lift (up to 26 inches hg) | • Simple to operate and maintain | |
• Reduce mess | • No moving parts | |
• Save Time And Money | • Reduce machine tool downtime |
Air Operated Sump Sucker Requirements
• 3/4 inch headers | • 75 to 120 PSI | |
• 1/2 inch drop | • 56 to 80 CFM | |
• 3/8 inch connection to equipment | ||
** A 1/2 inch air connection to the sump cleaner will achieve higher performance. **
Simple To Operate
Plug the air connection into the sump cleaner, open the valve and go to work.
Low Maintenance
The SA5 series air powered sump cleaner has no moving parts.
Safety Is Important
CECOR is the only sump cleaner manufacturer to offer a three-step system to prevent over pressurization for air units.
- Pressure Regulator – controls the operating pressure (6 psi) set at factory.
- Pressure Relief Valve – goes off at 8 psi (loud, unmufflered sound) alerting operator
- Rupture Disk – Shuts the unit off at 15 psi
Filtering
The Air operated Sump Shark®, SA5 series, sump cleaners come standard with a 1.0 cubic foot filter basket (F10). Optional 2.3 cubic foot filter basket (F23) available for sumps with higher volumes of sludge in their sumps. The optional DF4 discharge filter is available on all models if additional filtering is required for your operation.