SE10 and SE15 series
Electric sump cleaner (SE10 & SE15 series) use existing shop electricals to vacuum chips, swarf, sludge and fluids from dirty sumps. Clean up your machine tools sumps smarter, faster and safer with a Sump Shark®! It’s time to ditch the grueling pail-n-shovel or shop-vac process.
The Right Tool
- Filter the thickest of sludge
- Reduce mess
- Save time and money
- Pumping rate up to 60 gpm
- Easy to operate
- Reduce machine tool downtime
- High suction lift (17″ hg)
- Rotary, vane-type vacuum pump
- 13.8 amps
- High nozzle velocity
- Vacuum motor
- 14.2 amps
Electric operated sump sucker requirements
- 120 volt outlet
- Single phase
- See amps above
- 60 hertz
Simple to operate
Plug into your 120v wall outlet, turn on the machine and go to work.
Safety is important
The electric sump cleaners have a primary and a back up system for monitoring over-pressurization. The primary is an operating relief valve and the secondary will prevent the unit from exceeding 8 psi.
The SE10 and SE15 both have a mechanical (non-electric) overflow protection that will prevent the tank from overflowing when full.
Filtering
The single phase electric operated Sump Shark®, model SE10 & SE15 series, sump cleaners come standard with a 1.0 cubic foot filter basket (F10). Optional 2.3 cubic foot filter basket (F23) available for sumps with higher volumes of sludge in their sumps.