SE30 or SE50 Series
Sump Cleaner
Three phase sump cleaner (SE30 & SE50 series) uses existing electricals to vacuum chips, swarf, sludge and fluids from dirty sumps. Clean up your machine tools sumps smarter, faster & safer! It’s time to ditch the grueling pail-n-shovel process.
The Right Tool
Three phase electric sump cleaners (SE30 & SE50 series) use existing shop electricals to vacuum chips, swarf, sludge and fluids from dirty sumps. Clean up your machine tools sumps smarter, faster and safer with a Sump Shark®! It’s time to ditch the grueling pail-n-shovel or shop-vac process.
| • Filter the thickest of sludge | • Strong nozzle velocity | |
| • High suction lift (13 inches of hg) | • Reduce mess | |
| • Lobe type positive displacement pump | • Simple to operate and maintain | |
| • Save time and money | • Reduce machine tool downtime |
Electrical Requirements
The SE30 Series has a 3 HP electrical motor (60 gpm) and the SE50 series has a 5 HP motor (110 gpm). The following are common to both of the sump cleaner series:
| • Three phase electricals | • 208-230/406 volt outlet | |
| • 14.8-14.0/7.0 amps | • 60 hertz | |
Simple To Operate
Plug into the appropriate electrical circuit and go to work.
Safety Is Important
CECOR Sump Sharks® have a vacuum pressure gauge so the operator can see what is going on inside the tank.
The three phase electric sump cleaners have a primary and a back up system for monitoring over-pressurization. The primary is an operating relief valve and the secondary will prevent the unit from exceeding 8 psi.
The SE30 and SE50 both have a mechanical (non-electric) overflow protection that will prevent the tank from overflowing when full.
Filtering
- SE30 (90 – 140 gallon) with a F23 – 2.3 cubic foot filter basket.
- SE50 (200 – 600 gallon) series sump cleaners come standard with a F50 – 5.0 cubic foot filter basket
- DF4 discharge filter is optional on all models if required for your operation.
