Sump Cleaner/Dispenser, Air, Dual Tanks 300/300 Gallon
Mounted on custom trailer

Sump Cleaner/Dispenser, Air, Dual Tanks 300/300 Gallon

Sump Cleaner/Dispensers - Air Power, Combination Tanks About Sump Shark® Sump Cleaners

Built in the USA Proudly designed and manufactured in the U.S.A.

CECOR’s CA5 air-operated, dual 300 gallon tank Sump Shark sump cleaner dispenser has the same power, deep vacuum and filtering capabilities as the single-tank SA5 Sump Shark. The CA5 series includes an additional tank for dispensing fresh fluid to the machine tool. Ideal for coolant maintenance in a large facility.

  • Ideal for use with a coolant maintenance system.
  • Two completely separate 300 gallon tanks on the same chassis.
  • Each tank has pump in/pump out capability.

Air powered sump cleaner/dispenser Spec sheet

Full Specs

Series: CA5
Tank Size: (2) 300 Gal (1,136 L)

Transport: Custom base (see options)
Pump: Air-operated Venturi
Suction lift: 26" Hg (Mercury)
Standard Filter F10 (see options)
Clean Out Door: 16" diameter hinged door with 2-1/2" drain port
Pressure discharge: 6 PSI with safety backup valve
Minimum air requirements: Air line of 1/2" or larger. 3/8" or larger air quick disconnect coupler. Line pressure of 60 to 120 PSI and volumetric capacity of 45 to 80 CFM)
Overfill protection: Automatic overfill protection, all discharge ports valved
Hoses: 1-1/2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler.
1-1/4" I.D. x 16' with full flow shut off nozzle.
Tools: (1) Straight, (1) flexible and (1) flared nozzle tool
Dimensions: 121" L 42" W 63" H
Weight: 1,753 lbs

Machines must not be used for flammable fluids (fuels, paints, solvents, etc). Avoid use in extra-high temperature or spark-hazard environments (ovens, welding areas, etc).

CA5 Series large twin tank unt has two 300 gallon tanks – one is a sump cleaner; the other dispenses fresh coolant. Designed to work in tandem with a central coolant recycling program, 300 gallon sump cleaner tank vacuums chips, sludge and coolant from the machine tool sump. The F10 (1 cu. ft.) filter separates solids from fluid. While at the machine tool, use the 300-gallon dispenser side to fill sump with fresh or recycled coolant. Then transport filtered coolant in sump cleaner side for further processing.

Get a Quote

Sump Cleaner/Dispenser, Air, Dual Tanks 300/300 Gallon

Sump Cleaner/Dispenser, Air, Dual Tanks 300/300 Gallon

Sump Cleaner/Dispensers - Air Power
Combination Tanks