Sump Cleaner Electric 60 Gallon Tank
Not an ordinary chip vacuum
Sump Cleaner Electric 60 Gallon Tank
Sump Cleaner Electric 60 Gallon Tank
Sump Cleaner Electric 60 Gallon Tank

Sump Cleaner Electric 60 Gallon Tank

Single-Phase Electric, Single Tank Sump Cleaner About Sump Shark® Sump Cleaners

Built in the USA Proudly designed and manufactured in the U.S.A.

Model SE15-60PL electric Sump Shark vacuums metal chips, sludge and coolant out of the sump, as well as puddles off of the floor. The SE15-60PL has a smart space-saving vertical design and can be plugged into any standard electric outlet. This feature makes the SE15-60PL very convenient to use in a variety of locations.

  • Easy push transport or lift with fork truck.
  • High nozzle velocity vacuums puddles off the floor.
  • “Plug-n-play” convenience. Runs on standard 115/60/1 15 amp electric.
  • High performance chip vacuum.

115 volt electric sump cleaner Spec sheet

Full Specs

Series: SE15
Tank Size: 60 gal (227 L)

Transport: PL - Push/lift
Motor: Vacuum Motor-Volts 115-Amps 14.2-Hertz 60-Phase 1
Pump: Rotary, vane-type vacuum pump
Suction Lift: 13" Hg (Mercury)
Standard Filter: F10 - 1 cu. ft. (see options)
Overfill Prevention: Automatic overfill protection
Cleanout Port: 2-1/2" drain port in bottom
Pressure Discharge: 6 PSI (pounds per square inch) with safety backup valve
Wheels: Two 8" x 2" phenolic wheels One 6" x 2" swivel caster
Hose: 1-1/2" I.D. x 16' oil-resistant PVC suction/discharge hose including quick-disconnect coupler.
Tools: Three suction tools (1) straight, (1) flexible and (1) flared nozzle.
Dimensions: 45" L x 36" W x 57" H
Shipping Weight: 350 lbs

Machines must not be used for flammable fluids (fuels, paints, solvents, etc). Avoid use in extra-high temperature or spark-hazard environments (ovens, welding areas, etc).

Filter Options

Industrial Tools For CECOR Sump Cleaners And Carts

Power Cord

Reduce machine downtime, labor costs and mess.

With a suction lift of 13” Hg or 177” water and pumping rate of 60 gallons per minute, the SE15-60PL electric Sump Sharp can vacuum up an entire sump of metalworking fluid entrained with sludge or chips in just minutes. On board one cubic foot filter captures solids in reusable filter bag. Filtered fluid is pumped out of the tank for reuse or transported for batch recycling. High CFM gives the SE15-60PL increased nozzle velocity for picking up shallow puddles or chips from the floor.

Using a Sump Shark sump cleaner is much easier and faster than cleaning a sump by hand using a pail and shovel or shop vac. Doing the job faster will decrease labor costs and machine tool downtime. In addition, using coolant longer and disposing of less will cut costs even further.

The SE15-60PL has overfill protection and all discharge ports are valved. Unit comes complete with hoses, quick-disconnect coupler, suction tools and filter bags. Optional F23 filter (2.3 cu.ft.) is available for coolant heavy with chips and swarf. DF4 discharge filter is available for finest filtering.

Why is good sump cleaning important?


Ask about a trial & evaluation. All you have to do is sign an agreement, send us a PO and agree to cover transportation costs. You try the SE15-60PL for 30 days. If it meets your expectations you keep it, otherwise, simply clean it out and ship it back to us. Call 1-800-356-9042 and ask for sales. Let’s get started today!

Get a Quote

Sump Cleaner Electric 60 Gallon Tank

Sump Cleaner Electric 60 Gallon Tank

Single-Phase Electric
Single Tank Sump Cleaner