Air Sump Cleaner Dispenser 60 or 100 gallon

Increasing costs for the purchase and disposal of metalworking fluid have made extending the life of metalworking fluid crucial to most metalworking operations. The CECOR CA5 Series can be an important part of your coolant recycling program. The CA5 has two tanks on a single chassis, a sump cleaner tank on one side and a coolant dispenser tank on the other. The smallest air combination units are available in 60/60 or 100/100 gallon capacities.

One chassis with two tools

  • Two 60 or 100 gallon tanks on a single chassis
  • One sump cleaner and one dispenser

Ready to clean and refill your sump quickly.

  • Suction the entire contents from machine tool sump quickly
  • Metalworking fluid, chips and swarf will be removed
  • F10 Filter catches chips and swarf
  • Pump in/ Pump out capabilities

Clear
TOTAL: $11500.00

Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.

Full Specs

Series: CA5
Tank Size: (2) 60 Gal (227 L) or
(2) 100 Gal (379 L)
Standard Transport: PT -push/tow (see options)
Pump: Air-operated Venturi
Suction Lift: 26" Hg (Mercury)
Standard Filter: F10 - 1 cu. ft. (Optional F23 available)
Overfill protection: Automatic overfill protection, all discharge ports valved
Clean out door: 8" x 10" door with a 1-1/4" drain port
Pressure discharge: 6 PSI with safety backup valve
Minimum air requirements: Air runs of 3/4" or larger and verticals (drops) of 3/8" or more. Line pressure of 75 to 120 PSI and volumetric capacity of 53 to 80 CFM
Wheels: Poly tires: (2) 12" x 3" & (1) 8" x 3" swivel caster
Hose: 1-1/2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler.
1-1/4" I.D. x 16' with full flow shut off nozzle.
Tools: (1) Straight, (1) flexible and (1) flared nozzle tool
Dimensions: 60 Gal: 86" L x 30" W x 52" H
100 Gal: 92" L x 34" W x 57" H
Shipping weight: 60 Gal: 850 lbs
100 Gal: 1000 lbs

Filter and replenish metalworking fluid.

CA5 Series smallest sump cleaner/dispenser units have all the power of the larger units. Conveniently operating on plant air, the CA5 has a deep suction lift of 26” Hg (Mercury) or 350” (9 meters) water. Vacuum lift removes heavy sludge, chips and dirty coolant in minutes. F10 (1 cu. ft.) filter separates solids from coolant. Dispenser side saves time by dispensing clean or treated coolant into the machine tool sump. Then transport filtered coolant for central recycling.

Sump cleaner/ dispenser is mounted on two poly tires and one swivel caster for easy pushing by one person. Pintle-eye tow bar allows unit to be towed by plant tug. Convenient 8” x 10” clean out door is flush-to-the-bottom for easy cleaning. Also included is a 1-1/4” drain port in door.
Safety is important
CECOR is the only sump cleaner to offer a three-step system to prevent over-pressurization for air units.

  • Pressure Regulator – controls the operating pressure (6 psi) set at factory.
  • Pressure Relief Valve – goes off at 8 psi alerting operator
  • Rupture Disk – Shuts the unit off at 15 psi

CECOR units come with a pressure gauge. Many other sump cleaners don’t. We believe it’s important to understand what is going on inside the tank and how your Sump Shark is performing.


Get a Quote

Product:

Air Sump Cleaner Dispenser 60 or 100 gallon