The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches.
Sump Cleaner Electric 300-400-500-Gallon
The SE10 Series offers deep vacuum generating suction lift of 17″ Hg to 231″ (6 meters) water for fast sump cleaning. Plug into standard electric outlet for easy use. This sludge vacuum filters chips and sludge from industrial fluids for reuse or further processing.
- Use fluid longer, dispose of less
- Reduce downtime
- Reduce cost of cleaning labor
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
300 Gal (1.136 L) or
400 Gal (1,514 L) or
500 Gal (1,893 L)
|Motor:||1 HP Electric Motor Volts 115 - Amps 13.4 - Hertz 60 - Phase 1|
|Pump:||Rotary, vane-type vacuum pump|
|Suction Lift:||17” Hg (Mercury)|
|Standard Filter:||F10 - 1 cu. ft. (Optional F23 available)|
|Overfill Prevention:||Automatic overfill protection all discharge ports valved|
|Cleanout Door:||16" diameter hinged door with 2-1/2" drain port|
|Pressure Discharge:||6 PSI (pounds per square inch) with safety back up|
300 Gal: (2) 16" x 4"rubber tires, (1) 12" x 3" swivel caster
400 Gal: (2) 16" x 4"rubber tires, (1) 12" x 3" swivel caster
500 Gal: (2) 16" x 5"rubber tires, (1) 12" x 3" swivel caster
|Hoses:||1-1/2” I.D. x 16’ oil-resistant PVC suction/discharge hose including quick-disconnect coupler.|
|Tools:||Three suction tools (1) straight, (1) flexible and (1) flared nozzle|
300 Gal: 96" L 40" W 65" H
400 Gal: 99" L 46" W 71" H
500 Gal: 118" L 48" W 73" H
300 Gal: 975 lbs
400 Gal: 1380 lbs
500 Gal: 1465 lbs
SE10 Series sludge vacuums have a 1 HP motor for operation on standard 115/60/1 electricals. High suction rate of 17” of Hg (Mercury) lifts sludge, chips and fluid out of the sump fast. Sump contents pass through on board filter where solids are trapped. Filtered fluid in the tank can be pumped out with a simple switch to the discharge function.
Larger SE10 Sump Sharks are available in 300, 400 and 500 gallon capacities Heavy-duty steel tank holds up in tough environments. The larger SE10 Sump Sharks have a 16″ hinged clean out door with a 2-1/2″ drain port. Door is flush-to-bottom of tank for easy cleaning. All Sump Sharks have a pressure gauge so operator can monitor pressure. Tow bar with pintle-eye hitch allows towing by tug. Sump Shark comes complete with hose and three suction tools; straight, flexible and flare nozzle.
Equipped standard with F10 filter (1.0 cu. ft. capacity). Optional F23 (2.3 cu. ft. capacity) is recommended when coolant is loaded with chips and swarf. A coarse, regular and fine weave filter bag is included with the units. Optional DF4 discharge filter is available for second stage filtering down to 10 microns. See related products.
|Sump Shark® Intro||Power Options|