Disclaimer:
The photos shown here are only representations of the actual product you will receive. They are not intended to be exact matches. Standard color is black.
Three Phase Electric Sump Cleaner Dispenser 150 or 200 gallon
Use the CE50-150/150PT or CE50-200/200PT combination sump cleaner/dispensers with a fluid recycling program. These combination units each have two separate tanks, a sump cleaner tank and a dispenser tank. Clean the sump and filter fluid with the sump cleaner side, dispense fresh or recycled fluid with the dispenser side.
One chassis with two tools
- Two 150 or 200 gallon tanks on a single chassis
- One sump cleaner and one dispenser
Ready to clean and refill your sump quickly.
- Suction the entire contents from machine tool sump quickly
- Metalworking fluid, chips and swarf will be removed
- F23 Filter catches chips and swarf
- Top off sump with fresh coolant from dispenser side
$22,500.00 – $24,500.00
Lead Time: Estimated shipping is 5 to 7 weeks. Actual shipping date depends on the existing volume of orders when your order is received. After receiving your order we will send an acknowledgement with an expected shipping week.
Full Specs
Series: | CE50 |
Tank Size: | (2) 150 Gal/ea (568 L/ea) or (2) 200 Gal/ea (757 L/ea) |
Standard transport: | Tow only (Other options available) |
Motor: | 5 HP Electric Motor 3-Phase: Volts 208-230/460-Amps 14.8-14.0/7.0-Hertz 60 |
Pump: | Lobe type, positive displacement air pump |
Suction Lift: | 13" Hg (Mercury) |
Standard filter basket: | F23 |
Overfill prevention: | Automatic overfill protection, all discharge ports valved |
Cleanout door: | 8"x10" door with 1-1/4" drain port |
Pressure discharge: | 6 PSI with safety backup valve |
Wheels: | 150 Gal: (2) 16" x 4" rubber tires & (1) 12" x 3" swivel caster 200 Gal: (2) 16" x 4" rubber tires & (2) 12" x 3" swivel caster |
Hose: |
2" I.D. x 16' oil-resistant PVS suction/discharge hose including quick-disconnect coupler. 1-1/4" I.D. x 16' with full flow shut off nozzle. |
Tools: | Three suction tools (1) straight, (1) flexible and (1) flared nozzles. |
Dimensions: | 150 Gal: 96"L x 42"W x 71" H 200 Gal: 99"L x 46"W x 77" H |
Shipping weight: | 150 Gal: 1,680 lbs 200 Gal: 2,085 lbs |
Collect and filters dirty coolant/distributes clean coolant
CECOR Combination Sump Sharks collect and transport contaminated metalworking fluid to either a batch system or waste area. At the same time they deliver fresh metalworking fluid to refill the sump. Two separate tanks on a single chassis – the sump cleaner tank filters solids from metalworking fluid. Reuse metalworking fluid or pre-filtered fluid for use with central reconditioning system. The dispenser side can be filled with pump or through refill hatch. Pump in/pump out capability provides mess-free collection and transport of metalworking fluid, chips and sludge.
CE50 Series in the 150/150 and 200/200 gallon size have tow bar with pintle-eye hitch to accommodate in-plant tugs or tractors. Flush-to-the-bottom clean-out door makes it easy to rinse or rake out tank. The F23, 2.3 capacity filter, is fitted for fork lift or hook hoist handling. Patented compound linkage and rotary latch control the bottom opening door for safe emptying. Either of these units can be fitted with a custom base that attaches to a walk/ride or in plant utility truck.
The power of the CE50’s five horsepower electric motor generates suction to 13” Hg (177” water) and a pumping rate up to 110 gallons per minute. The sump cleaner side’s 2.3 cu. ft. catches chips and swarf, while the filtered fluid enters the tank. Filtered fluid can be pumped back to the sump or transported for batch recycling. The sump can be topped off with fresh metalworking from the Dispenser side of the CE50. Both tanks have pump-in/pump-out capability.
Get a Quote
