SA3-DT is the starting point of our wet vac drum top units. It uses an air venturi system to create a suction lift of up to 12 hg (mercury). This is equivalent to pulling water through a column 163″ (4 meters) deep. It will suction most sludge & fluid from your CNC sump at up to 40 gallons per minute into a 55-gallon drum. This unit will definitely speed up the sump cleaning process.
This drum top wet vac conveniently works on in plant air. You will need 1/2” air service with line pressure of 75 to 120 PSI (pounds per square inch) to get the most out of this unit.
When you purchase a SA3-DT, it includes the following:
- Air Hose: 20’ oil resistant 1/2” air hose
- Suction Hose: 1-1/2” I.D. x 10’ oil-resistant PVC suction hose including quick-disconnect coupler
- 3 Suction tools
- Automatic overfill protection
We recommend purchasing the optional TX-55PL Drum Tank with this unit. The TX-55PL is manufactured to withstand the suction depth of the SA3-DT.
