Three Phase Electric Sump Cleaner

3-Phase sump sucker

SE30 or SE50 Series

Three phase electric sump cleaners (SE30 & SE50 series) use existing shop electricals to vacuum chips, swarf, sludge and fluids from dirty sumps. Clean up your machine tools sumps smarter, faster and safer with a Sump Shark®! It’s time to ditch the grueling pail-n-shovel or shop-vac process.

The right tool

  • Filter thick sludge
  • High suction lift (13 inches of hg)
  • Lobe type positive displacement pump
  • Save time and money
  • Stong nozzle velocity
  • Reduce mess
  • Simple to operate and maintain
  • Reduce machine tool downtime

3-phase sump sucker electric requirements

SE30 sump sucker

  • 3 HP electric motor
  • 208-230/406 volt outlet
  • Three phase
  • 14.8-14.0/7.0 amps
  • 60 hertz

SE50 sump sucker

  • 5 HP electric motor

Common to both SE30 and SE50 sump suckers

  • 208-230/406 volt outlet
  • Three phase
  • 14.8-14.0/7.0 amps
  • 60 hertz

Simple to operate

Plug into the appropriate electrical circuit and go to work.

Safety is important

CECOR Sump Sharks® have a vacuum pressure gauge so the operator can see what is going on inside the tank.
Pressure Gauge

The three phase electric sump cleaners have a primary and a back up system for monitoring over-pressurization. The primary is an operating relief valve and the secondary will prevent the unit from exceeding 8 psi.

The SE30 and SE50 both have a mechanical (non-electric) overflow protection that will prevent the tank from overflowing when full.

Filtering